Общее > Что нам готовит Honda

О как,други!

<< < (10/19) > >>

PokeP:
Ну вот и дожались инфу. Все как я и описал и даже хуже :'( Пока все читают кому интересно, Диммс может извиниться  :P

Technical specifications – Integra (E-type)

ENGINE
Type               Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder

Displacement                     670cc

Bore x Stroke                     73mm x 80mm

Compression Ratio         10.7 : 1

Max. Power Output         38.1kW/6,250min-1 (95/1/EC)

Max. Torque            62Nm/4,750min-1 (95/1/EC)

FUEL SYSTEM
Carburation            PGM-FI electronic fuel injection

Throttle Bore            36mm

Air-cleaner Capacity                  5.8 litres

Fuel Tank Capacity         14.1 litres

Fuel Consumption                              27.9 km/l (78.8mpg) - WMTC in D-Mode


ELECTRICAL SYSTEM

Ignition System   Computer-controlled digital transistorised with electronic advance

Ignition Timing                     12° BTDC (idle) ~ 53.9° BTDC (6.600min-1)

Sparkplug Type         IFR6G-11K   

Starter                        Electric

Battery Capacity         12V/11AH

Headlights            12V; 60W  1 (high) / 55W  1 (low)


DRIVETRAIN

Clutch               Wet, multiplate hydraulic 2-clutch

Transmission Operation      D mode/S mode/Manual mode

Transmission Type         6-speed Dual Clutch Transmission






Primary Reduction         1.921

Gear Ratios   1       2.666
   2   1.904
   3   1.454
   4   1.200
   5   1.033
   6   0.837


Final Reduction         2.437

Final Drive            Chain


FRAME

Type               Diamond; steel pipe


CHASSIS

Dimensions (LxWxH)                  2195mm x 790mm x 1440mm

Wheelbase            1525mm

Caster Angle            27°

Trail               110mm

Steering Turn Angle         35°

Seat Height            790mm

Ground Clearance         135mm (minimum)

Kerb Weight            238kg

Max Carrying Capacity      195kg


SUSPENSION

Type   Front   41mm telescopic fork, 120mm travel
    Rear   Monoshock damper, Pro-Link swingarm, 120mm travel

WHEELS

Type               Front   multi-spoke cast aluminium
Rear   multi-spoke cast aluminium

Rim Size            Front   17M/C x MT3.50
               Rear   Rear 17M/C x MT4.50

Tyre Size            Front   120/70ZR17M/C (58W)
               Rear   160/60ZR17M/C (69W)

Tyre Pressure                       Front   250kPa
               Rear   290kPa
BRAKES
Type   Front   320mm single wavy hydraulic disc with 3-piston calipers and sintered metal pads, ABS/CBS as standard

Rear    240mm single wavy hydraulic disc with single-piston caliper and sintered metal pads, ABS/CBS as standard

ego:
А в чем собсна печаль то?

Andrey Potapenko:
Характеристики примерно как у DN-01.

georg-m:
Статья в скутердайджест об Хонде Интегра
http://www.scooterdigest.ru/pub.asp?id=5224

Alexei:
Если бы не цепной привод , то цены нет этому аппарату !!!

Навигация

[0] Главная страница сообщений

[#] Следующая страница

[*] Предыдущая страница

Перейти к полной версии